MTU three phase 3300V/50Hz/1500rpm/2000kw containerized type diesel generator set
Standard Features:
1.All generator set comply with international design and quality standards, such as ISO8528(GB/T2820-97), ISO3046,
BS.EN60034, BS5000, IEC34-1, GB755, VDE0530, CSA22-2, AS1359, and so on.
2.Engine and alternator coupled with the compact base of structure steel, equipped with exhaust silencer and radiator.
3.AVESPEED designed controller IS900 and multiple circuit breaker as a standard configuration for single unit.
4.One year limited warranty covers all systems and components.
1.All generator set comply with international design and quality standards, such as ISO8528(GB/T2820-97), ISO3046,
BS.EN60034, BS5000, IEC34-1, GB755, VDE0530, CSA22-2, AS1359, and so on.
2.Engine and alternator coupled with the compact base of structure steel, equipped with exhaust silencer and radiator.
3.AVESPEED designed controller IS900 and multiple circuit breaker as a standard configuration for single unit.
4.One year limited warranty covers all systems and components.
>>Prime power(3B Application Group)
This rating is applicable for supplying electrical power in lieu of commercially purchased power. Variable load should not exceed a 75% average of the prime power, and this model can supply 10% over-load power for 1 hour in 12 hours.
>>Standby power(3D Application Group)
There rating should be applied where reliable utility power is available. A standby rated engine should be sized for a maximum of an 85% average load factor and 500 hours of operation per year. No overload capability is available for this rating.
This rating is applicable for supplying electrical power in lieu of commercially purchased power. Variable load should not exceed a 75% average of the prime power, and this model can supply 10% over-load power for 1 hour in 12 hours.
>>Standby power(3D Application Group)
There rating should be applied where reliable utility power is available. A standby rated engine should be sized for a maximum of an 85% average load factor and 500 hours of operation per year. No overload capability is available for this rating.
All data is based on:
1. Engine operating with fuel system, water pump, lubricating oil pump, air cleaner and exhaust silencer; not included are battery charging alternator, fan, and optional driven components.
2. Engine operating with fuel corresponding to grade No. 2-D per ASTM D975.
3. ISO 3046, Part 1, Standard Reference Conditions of:
Barometric Pressure: 100 kPa (29.53 in Hg)
Air Temperature : 25 degree centigrade (77 ); Altitude:100 m (361 ft); Relative Humidity:30%;
Air Intake Restriction: 254 mm H2O (10 in H2 O);Exhaust Restriction : 51 mm Hg (2 in Hg).
4. Backed by worldwide service network.
N/A : Not Available;
TBD: To Be Determined;
Product packages:
Export wooden case (standard) or Plywood case (optional)
Specification of 2000KW Diesel Genset
| Model Specification | 20V4000G23 |
| BASIC TECHNICAL DATA | |
| Manufacturer | MTU |
| Engine type | 4-cycle,turbocharged and water charge air cooled, fuel-consumption optimized |
| Cylinder arrangement | 20cylinders,Vee 90° |
| Bore and stroke(mm) | 170×210 |
| Compression ratio | 16.4:1 |
| Displacement(L) | 95.4 |
| Estimated total weight (dry)(kg) | 9640 |
| Engine rated speed(rpm) | 1500 |
| Prime power(kW).gross | 2200 |
| Standby power(kW).gross | 2420 |
| EXHAUST SYSTEM | |
| Combustion flow( m³/s ).rate | 2.6 |
| Exhaust flow ( m³/s ).rate | 6.8 |
| Exhaust temperature.rate | 500 |
| Max. back pressure(mbar) | 30 |
| Exhaust noise unsilenced 1m(dBA) | 117 |
| COOLING SYSTEM | |
| Coolant capacity(only engine)(L) | 205 |
| FUEL CONSUMPTION | |
| Standby power(g/kwh) | 193 |
| 100% prime power(g/kwh) | 195 |
| 75% prime power(g/kwh) | 201 |
| 50% prime power(g/kwh) | 213 |
| LUBRICATION SYSTEM | |
| Oil capacity, initial filling(L) | 390 |
| ELECTRIC SYSTEM | |
| Engine control module | ADEC |
| Starter motor(V/num×KW) | 24V/2*9KW |
| High idling speed(rpm) | 1700 |
