THE FOLLOWING ENGINE, ALTERNATOR AND CONTROLLER BRANDS FOR OPTIONS
| PRIME POWER | ENGINE | ALTERNATOR | CONTROLLER |
| 25KVA - 1500KVA | CUMMINS | STAMFORD | DEEPSEA |
| 9KVA - 2250KVA | PERKINS | GENLITEC (COPY STAMFORD) | COMAP |
| 20KVA - 560KVA | DEUTZ | LEROY SOMER | SMARTGEN |
| 250KVA - 3000KVA | MTU | MECC ALTE | |
| 10KVA - 38KVA | KUBOTA | ENGGA | |
| 20KVA - 180KVA | LOVOL | MARATHON | |
| 150KVA - 750KVA | DOOSAN | ||
| 85KVA - 730KVA | VOLVO | ||
| 10KVA - 250KVA | RICARDO | ||
| 10KVA - 2500KVA | OTHER CHINESE BRAND |
13kVA Perkins Diesel Generator with Leroy Somer Alternator
Δ STANDARD CONFIGURATION
1) Powered by original PERKINS water-cooled diesel engine.
2) PERKINS diesel engine with 12 months global warranty.
3) Original STAMFORD Single bearing alternator with insulation class H and IP23.
4) Standard CHINT or DELIXI circuit breaker, ABB as an optional.
5) Steel base fuel tank with anti-vibration mounting.
6) Based at leaset 8 hours build-in fuel tank ensure daily use.
7) Industrial 9 dB muffler exhaust system, free-maintenance battery, complete set of user's manual.
8) Flexible fuel lines and lube oil, water & fuel drain cocks.
9) Standard SMARTGEN HGM6120N antomatic start digital controller.
10) Standard Shrink wrap packing method (Plywood packing box as optional).
Δ TESTING ITEMS
GENLITEC POWER provides a full line of brand new and high quality products.
Each and every unit is strictly factory tested before shipment.
1) Parts faults testing
2) Fuel tank pressure testing
3) Bolt tightening torque testing
4) Painting thickness testing
5) Voltage bearing and insulation testing
6) Noise testing
7) Loading Testing: 25%, 50%, 75%, 100%, 110% load to check verify that all control systems, alarm and shut-down protection.
Δ OPTIONAL SUPPLY
1) Weatherproof canopy / Soundproof canopy / Trailer-mounted
2) Engine / Alternator Pre-heaters
3) Auto load sharing & synchronization panel
4) Build-in ATS (Auto start & stop Main Failure (AMF)
5) Large 12/24 hours fuel tank
6) Power output sockets
Δ PRODUCT PHOTOS
Δ TECHNICAL DATA
| Genset Model | GPP9-II |
| Prime Power(50HZ) | 7KW / 9KVA |
| Standby Power(50HZ) | 7.7KW /10KVA |
| Frequency/Speed | 50Hz/1500rpm |
| Voltage | 230V/400V |
| Phases | Three phases, four wires |
| Manufacturer | GENLITEC POWER EQUIPMENT CO., LTD. |
| Engine Data | |
| Manufacturer | Perkins Engines Company Limited |
| Model | 403D-11G |
| Engine speed | 1500rpm |
| Engine power | |
| Prime power(Gross ) | 8.6 kWm / 11.5 bhp |
| Standby power(Gross) | 9.5 kWm / 12.7 bhp |
| Number of cylinders | 3 |
| Cylinder arrangement | Vertical in-line |
| Cycle | 4 stroke |
| Aspiration | Naturally aspirated |
| Compression ratio | 23:01 |
| Bore and Stroke | 77*81 mm |
| Displacment | 1.1 litres |
| Direction of rotation | Anti-clockwise viewed on flywheel |
| Cooling system | Water cooled |
| Total coolant capacity | 5.2 litres |
| Total lubrication system capacity | 4.9 litres |
| Alternator Data | |
| Manufacturer / Model | Leroy-somer Electro-technique (Fuzhou) Company Ltd. |
| Model | LSA40VS1 |
| Output power | 8KW |
| AVR model | R220 |
| Number of phase | 3 |
| Power factor (Cos Phi) | 0.8 |
| Altitude | ≤ 1000 m |
| Overspeed | 2250RPM |
| Number of Pole | 4 |
| Exciter type | Shunt |
| Insulation class | H |
| Voltage regulation | ±0.5% |
| Sustained short circuit current | 300% (3 IN) : 10s |
| Total harmonics (TGH/THC) | < 4 % |
| Wave form : NEMA = TIF | < 50 |
| Wave form : I.E.C. = THF | < 2% |
| Bearing | single |
| Coupling | Direct |
Δ FAQ (FREQUENCY ASKED QUESTION)
Question: What's your warranty period?
Answer: Our payment terms is 1 year or 1000 running hours whichever comes first. But based on some special project, we can extended our warranty period.
Question: Does your generators has global warranty?
Answer: Yes, most of our products like Cummins, Perkins, Doosan power generator enjoy the global warranty service. And the alternator we use like Leroysomer, Stamford, marathon also enjoy the global warranty service, so you do not need to worry about the aftersales service.
Question: Do you accept OEM/ODM service?
Answer: Yes, we can accept OEM.
Question: What's your payment terms?
Answer: We can accept T/T 30% in advance, and the balance 70% shall be paid before shipment or L/C at sight, L/C deferred payment terms or west union.
Question: What's your delivery time?
Answer: Our normal delivery time is 25 working days. But if your order is some special engine and alternator, then the delivery time is longer.